This chart outlines the recommended maintenance intervals for the Proteus Safe System's components to ensure optimal performance and longevity. These intervals are suggestions and should be adjusted based on operational conditions, usage intensity, and specific site requirements.

#

Description

Daily

Weekly

Monthly

Quarterly

Annually

Pre operation

Post Operation

As needed

Clean robot

●





●

●



Manually remove foreign objects

●





●

●



Visually check condition of wheel bearings

●





●

●



Check bearings of the omni-wheel; clean/replaced if needed

●





●

●



Check tool assembly; ensure no foreign objects are obstructing movement

●





●




Inspect all glass on equipment (camera, laser, lights)

●





●

●



Ensure cables, hoses, and tethers are secure and undamaged

●





●

●



Check and test connectors and auxiliary equipment (cameras, lasers, etc.)

●






●



Clean magnets

●






●



Perform function test; check for abnormal sounds or signs

●





●




Verify wireless controller range

●










Robot

Check frame for dents, damage, or misalignment



●







Check wheels and tires for wear or damage



●







Verify all bolts are properly tightened




●






Inspect bolts for corrosion or damage





●





Ensure nameplate is attached and readable


●








Check onboard control enclosure gasket for damage




●






Replace corrosion protection emitter





●





Ensure omni wheel rotates freely; inspect bearings and seals




●






Inspect bearing seals for motor drive units




●






Check drive motor/gearbox for damage/wear



●







Check lifting equipment for damage; verify lifting certificates



●








Transport frame

Inspect transport frame for dents, damage, or misalignment



●







Check bolts on transport frame for corrosion or mechanical damage





●





Inspect ramp hinges and locks for damage; check functionality




●






Ensure wheels on transport frame are in good condition




●






Inspect document enclosure and remote controller box for damage




●






Verify document package availability in document enclosure



●







Inspect grounding cable and clamp; replace if damaged



●







Inspect antennas and cables for damage




●







PCC

Inspect PCC enclosure for dents or damages



●







Check display on PCC for damage or malfunctions



●







Inspect O-ring on Exd lid, if present.





●





Check for moisture or corrosion inside PCC enclosure





●






Cables plugs & sockets

Inspect cables, plugs, and sockets for wear and damage




●







Swingarm

Inspect swingarm structure for damage, dents, or misalignment



●







Inspect bolts on swingarm for corrosion or damage





●





Ensure connectors on swingarm are free of damage




●






Inspect camera's protective air curtain for damage; test functionality




●






Inspect rubber protective shield for damage




●







Proteus Safe system

Comprehensive inspection of robot








●

Perform corrective maintenance








●