Proteus Safe has five tool modes, Blastcan and four Linear Tool modes. To change between these modes follow this procedure: 

#

Description

Power & Startup, ref.: “Starting the WRC”

Press “System On”

Press and hold the “System On” for more than 5 seconds

Release “System On” When mode is changed in the display.
  • To change back perform this procedure until correct mode is displayed in the display.


Returning to Manual mode from Auto mode

It is not necessary to start the system again to return to manual mode: 

#

Description

Release left joystick from its position: wheel auto displacement stops.

Press: “Auto mode", this places the robot in manual mode.

Press: “System On,” this shut of the robot. 

Turn “Radio Main Switch” off, this shuts of the robot and radio.