After operating the Achilles Drive Unit, it is essential to perform a series of checks to ensure the system is safe, functional, and ready for operation. The following post-operation checks must be completed by the operator 

# 

Description 

Comment 
  1.  

Inspect the drive unit for visible damage, including dents, scratches, or loose components 

 
  1.  

Verify that all electrical connector and cable are properly attached and undamaged. 

 
  1.  

Check that the sprocket on the output shaft is secured by the split pin. 

 
  1.  

Refill the output shaft lubricant thru the grease nipple acc. to section 3.2  

Note: If water contamination is found in the exiting grease the Drive Unit must be replaced before diving! 

 
  1.  

If connector disconnected relubricate with Molykote 55